Unitor™ Electrosolv-E™ 25 LTR

  1. Home
  2. Products
  3. Wilhelmsen - Marine Chemicals
  4. Unitor™ Electrosolv-E™ 25 LTR

Unitor™ Electrosolv-E™ 25 LTR – Non-Chlorinated Electrical Cleaner & Degreaser

Unitor™ Electrosolv-E™ is a non-chlorinated solvent cleaner designed for effective cleaning and degreasing of electrical equipment and components. With a controlled evaporation rate, it efficiently removes grease and moisture without leaving residues.

  • Category: Industrial Solvent Cleaner

  • Unitor™ Electrosolv-E™ is a powerful, non-chlorinated solvent specifically formulated for cleaning and degreasing electrical equipment and components. With its controlled evaporation rate, it rapidly penetrates and dissolves grease and contaminants without leaving a moisture or film residue.
     

    This advanced formula is ideal for use in:
     Electrical motors
     Generators
     Switchgear
     Control panels
     Electronic devices

    - Non-Chlorinated: Safer for users and the environment

    - Fast-Drying & Residue-Free: Leaves equipment clean and dry without rinsing

    - Non-Corrosive: Safe for use on most electrical components

     

  • 1] Powerful Solvent Formula – Rapidly dissolves grease, dirt, and contaminants


    2] Controlled Evaporation Rate – Ensures optimal cleaning action without excessive drying


    3] Safe on Electrical Insulation – Tested to DIN-57370 standards with 209 KV/cm breakthrough voltage


    4] No Chlorinated Solvents – Safer for personnel and equipment


    5] Non-Corrosive – Ideal for sensitive electrical parts

  • 1] Fast-Acting Cleaning Solution – Saves time by dissolving grime rapidly


    2] Residue-Free Finish – Ensures no moisture or film is left behind


    3] Versatile Application – Suitable for use with brush, swab, or fine spray


    4] Safe for Electrical Equipment – Leaves no harmful residues that could impact performance

  • Preparation: Ensure cleaning is performed in a well-ventilated area.
    🔹 Application:

    • Apply undiluted using a brush, swab, or fine spray with appropriate spray equipment.
    • For small components, immersion in an Electrosolv-E™ bath is effective.
      🔹 Post-Cleaning:
    • After cleaning, evaporate remaining solvent using low-pressure compressed air.
    • Test insulation resistance on motors or generators post-cleaning to ensure safe operation.

    ⚠️ CAUTION: Never use Electrosolv-E™ on a running generator or motor. Avoid open flames when using as a fine spray.